List Of Parameter Numbers - Mitsubishi Electric MELSEC iQ-R Series User Manual

4.6

List of Parameter Numbers

This section lists the parameter numbers displayed in the module diagnostics.
If there is an error in the parameter settings and the parameter number is displayed, the corresponding parameter can be
identified.
It is displayed in "Detailed information" in the [Error Information] tab in the "Module Diagnostics" window of the RJ71GN11-T2.
( Page 166 Error Information)
Item
System Parameter
Required Settings
4 TROUBLESHOOTING
232
4.6 List of Parameter Numbers
Inter-module Select Inter-module Synchronization Target Module
Synchronization Setting
Fixed Scan Interval Setting of Inter-module Synchronization
Station Type
Network No.
Station No./IP Address Setting Method of Station No./IP Address Setting Method
Setting
Station No.
IP Address
Parameter Setting Method
Station Type
Network No.
Station No.
IP Address
Subnet Mask
Default Gateway
Setting Method of Basic/Application Settings
Parameter No.
0101H
0101H
7100H, 7700H
7100H
7100H
7100H
A012H
A012H
A013H
7100H