Clean The Product - Husqvarna Automower 520 Operator's Manual

To prepare
Examine the rubber grommets on the chassis to make sure that it is sealed
correctly.
Examine the skid plate and skid plate bearing.
Examine the rubber bellows in the cutting height adjustment system.
Examine the rubber bellows for the collision columns.
Replace the rubber bellows for the collision columns.
Examine and clean the airflow filter.
Replace the airflow filter.
Do a check of the tightening torque of chassis screws.
Open the chassis and replace all sealing strips.
Last step
Use a software service tool to do a function test of the functions of the product.

5.3 Clean the product

It is important to keep the product clean. A product with
large amounts of grass stuck to it will not cope as well
with slopes. It is recommended to clean using a brush.
Husqvarna recommends to use a special cleaning and
maintenance kit, available as an accessory. Contact
your Husqvarna representative for more information.
CAUTION:
Never use a high-pressure
washer to clean the product. Never use
solvents for cleaning.
5.3.1 To clean the chassis and blade disc
Examine the blade disc and blades weekly.
1. Set the Main switch to the
2. Put the product onto its side.
3. Make sure that the blades are not damaged and
that the blades and blade disc can rotate freely.
4. Clean the blade disc and chassis with a brush.
5.3.2 To clean the chassis
• Clean the bottom of the chassis with a brush or a
moist cloth.
32 - Maintenance
0 position.
Weekly
5.3.3 To clean the wheels
The product does not operate satisfactorily in slopes if
the wheels are blocked with grass.
• Use a soft brush to clean the wheels.
5.3.4 To clean the body of the product
• Use a moist cloth and a weak soap solution to
clean the body of the product.
5.3.5 To clean the charging station
WARNING:
supply from the power outlet before
maintenance, or when you clean the
charging station or power supply.
CAUTION:
Do not use a high-pressure
washer or running water to clean the
charging station.
Note:
The product cannot enter the charging station
if there are objects in the charging station. Clean the
charging station regularly.
• Remove grass, twigs and other objects from the
charging station.
Every Every
year third year
O
O
O
O
O
O
O
O
O
O
Disconnect the power
1439 - 015 - 23.11.2022