Husqvarna Automower 520 Operator's Manual page 28

STOP button pressed
If the alarm "STOP button pressed" is enabled, the
alarm goes off if someone presses the STOP button and
the PIN code is not entered within 30 seconds.
Carried away
Carried away is enabled, the product senses
If the alarm
unexpected motions, and the alarm goes off.
To set the Theft protection
1. Select Settings > Security > Theft protection in the
app.
2. Select the on/off button to enable or disable
Time lock, Require PIN code, STOP button
the
pressed and Carried away .
3. Move the horizontal bar to select the duration of
the alarm.
3.11.7.4 GeoFence
GeoFence is a GPS-based theft protection that makes
a virtual fence for the product. If the product is more
than a set distance away from the center position the
product will be deactivated and an alarm will start. The
PIN code is needed to deactivate the alarm and to start
the product again.
To set the center position and radius for the GeoFence
function
Settings > Security > GeoFence in the app.
1. Select
2. Put the product in a central position of the work
area.
on/off button to enable or disable the
3. Select the
GeoFence function. The center position will be set
to the current position of the product.
4. Use the horizontal bar to set the radius.
®
3.11.8 Automower Connect (Bluetooth
only)
®
Automower Connect you can enable or disable the
In
®
Automower Connect module. You can also see the
signal strength, connectivity status, initiate new pairing
or remove the product from the paired accounts.
3.11.9 Messages (Bluetooth
In this menu the previous fault and information
messages can be found. For some of the messages,
there are tips and advice to help to rectify the fault.
Note:
Messages menu is only available for
The
Bluetooth ® short-range connectivity.
28 - Installation
If the product is disrupted in any way, for example it
is trapped or the battery is low, a message is saved
relating to the disruption and the time it happened.
If the same message is repeated several times, this
may indicate that an adjustment to the installation or the
product is required. Refer to
3.11.10 Husqvarna Fleet Services
Husqvarna Fleet Services
gives the commercial fleet manager an overview of
all products. It also gives the fleet manager the
possibility to control all products remotely. Husqvarna
Fleet Services
For more information about Husqvarna Fleet Services
refer to www.husqvarna.com.
3.11.10.1 To connect to the product with Husqvarna
Fleet Services
1.
2.
3.
4.
5.
6.
®
7.
8.
9.
Note:
the Husqvarna Fleet Services
time.
®
only)
Installation on page 13 .
™
is a cloud solution that
™
is included for Automower
™
Download the Husqvarna Fleet Services
®
Automower Connect app to your mobile device.
Make a Husqvarna Fleet Services
(www.husqvarna.com).
Log on to the Husqvarna Fleet Services
Set the Main switch on the product to the
position.
Note:
The Bluetooth ® pairing operation mode
of the product is enabled for 3 minutes. If the
pairing operation between the product and the
mobile device is not completed in 3 minutes, set
the product to OFF and then set the product to ON.
Select the plus sign (+) in the Husqvarna Fleet
™
Services app.
Automower ®
Select and then
The Husqvarna Fleet Services
available products within short-range (Bluetooth
Select the product.
Acquire pairing code to connect the product
Select
to your Husqvarna Fleet Services
Obey the instructions in the Husqvarna Fleet
™
Services app.
It is only necessary to do a pairing operation of
™
app and the product one
1439 - 015 - 23.11.2022
™
®
520/550.
™
,
™
app and
™
account
™
app.
1
Automower ® Pro .
™
app searches for
®
).
™
account.