Initial Operation; Reception Of The Radio Signal; Manual Time Setting - La Crosse Technology WS6206 User Manual

Initial operation:

 Open the main unit battery compartment cover
 Insert 2 x AAA batteries observing polarity [ "+" and " –" marks]
 When you insert the batteries, all icons on the LCD will light up for 3 seconds, and you will hear a beep tone,
then detect indoor temperature & humidity.
 The main unit will now start to make a connection to the outdoor remote sensor. This process lasts for a
maximum of 3 minutes and will displayed by a flashing reception antenna symbol
corner of the number of channels.
 This moment, Open the remote Sensor battery compartment cover, push the channel switch to select the
number of channels to use, Insert 2 x AAA batteries according to the correct polarity 【Reference "+" and "–"
marks】, Press the "℃/°F" button to select the temperature unit you want, close the battery cover.
 After receiver has created a connection to the outdoor remote sensor, after up to 3 minutes it will enter the
DCF Radio control time receive mode (The backlight will turn off during RC reception).
 The backlight will remain on after DCF reception is completed.

Reception of the Radio signal:

 Press and hold the 【 】 button to manually enter the DCF radio control receiving function, when the adapter
is used for power supply, the backlight will be automatically and temporarily turned off after entering
receiving mode. After receiving, it will automatically return to the previous backlight brightness.
 Enters DCF receiving mode, the symbol
no flashing and switch to
：Received successfully
： The previous reception was successful, but the last reception failed
 At 1:00 /2:00 / 3:00 AM, the clock automatically carries out the synchronization procedure with the DCF
signal to correct any deviations to the exact time. If this synchronization attempt is unsuccessful, the system
will automatically attempt another synchronization at the next full one hour. This procedure is repeated
automatically up to total 5 times.
 During RC reception，to stop searching radio signal, press the【 】 button once.
F.Y.I.:
 We recommend the product be placed at a minimum distance of 2.5 meters (8.2Feet) to all sources of
interference, such as televisions or computer monitors
 Radio reception is weaker in rooms with concrete walls (e.g.: in cellars) and in offices. In such extreme
circumstances, place the system close to the window.
 During the RC receive mode, only the 【Light/Snooze】 and 【 】buttons have a function, other buttons
are not functional, If you want to carry out other functions of operation, please press 【 】 button to exit the
RC receiving mode.

Manual time setting:

 Press and hold the button
WS6206 User Manual
will flashing, when a valid signal is detected the symbol
is flashing, after about a few minutes, the receiving process will end.
for 2 seconds, the "
or switching power adapter.
starts to flash, and press 【 】 and 【 】
ON/OFF "
In the upper right