Snooze Function; Rf Transmission Procedure - La Crosse Technology WS6206 User Manual

M-F: From Monday to Friday
S-S: From Saturday to Sunday
:
From Monday to Sunday
 The snooze time can be set to 1-30 minutes or OFF, if "OFF" is selected, it means that the snooze function
is turned off.
 The Alarm2 time can be set according to the same method above
F.Y.I.:
 If there is no valid operation within 20 seconds, it will automatically return to normal time mode from the
alarm time set mode.
When adjusting the value, press and hold the 【 】or 【 】button to adjust continuously and quickly

 The Alarm will sound for 2 minutes if you do not deactivate it by pressing any button.
Turn OFF the alarm sound
 When it's ringing, press any button except the【SNOOZE】 button to stop the Alarm sound.
 When it's ringing, touch and hold the 【SNOOZE】button for 2 seconds to stop the Alarm sound.

Snooze function

 When it's ringing, touch the 【SNOOZE】 button once the alarm sounds to get to snooze mode, when the set
snooze time is over, it will ring again.

RF Transmission Procedure

 The main unit automatically starts receiving transmission from remote sensor for temperature & humidity
after batteries inserted.
 The remote sensor will automatically transmit temperature and humidity data to the main unit after batteries
inserted.
 If the main unit failed to receive transmission from remote sensor ("- -.-"and "--" display on the LCD), Press
and hold the 【CH】 button for 2 seconds, RF icon
signal of the channel.
 The main unit receive remote signals of up to 3 channels, press 【CH】 button to switch and display data of
different channels, when the symbol
automatically every 5 seconds.
Maximum / Minimum numerical value of memory
 When the temperature and humidity are shown in the LCD, the main unit began to record temperature/
humidity maximum and minimum numerical value.
 Press once 【 】 button, the LCD will display maximum value of temperature/ humidity, The LCD will
display the minimum value of temperature / humidity if press once 【 】 button again when the maximum
value is displayed.
 at the same time, there are "MAX" or "MIN" displayed on the LCD.
WS6206 User Manual
will be flashing，the main unit will rescan the launch
appears, the data of different channels will be displayed