T Reel Sensor (H902) - Sony DCR-PC350 Service Manual

3-22.C-IN Switch (S903), S Reel Sensor (H901) and T Reel Sensor (H902)
1. Removal procedure
1) Remove soldering at the two locations A and remove the C-
IN switch (S903) 1.
2) Remove soldering at the four locations B and remove the T
reel sensor (H902) 2.
3) Remove soldering at the four locations B and remove the S
reel sensor (H901) 3.
Soldering it at the
four locations B
Two dowels D
1 C-IN switch (S903)
DV MECHANICAL ADJUSTMENT MANUAL VII

2 T reel sensor (H902)

3 S reel sensor (H901)
Soldering it at the
four locations C
Soldering it at the
two locations A
— 33 —
2. Attachment procedure
1) Connect the S reel sensor (H901) 3 to the FP-468 flexible
board by soldering it at the four locations C.
2) Connect the T reel sensor (H902) 2 to the FP-468 flexible
board by soldering it at the four locations B.
3) Align the two dowels D and connect the C-IN switch (S903)
1 to the FP-468 flexible board by soldering it at the two
locations A.
Points to be noted
Use the rubber finger tip cover
Lead-free solder
Wire type
Soldering iron
Soldering iron tip
Temperature of the
soldering iron tip
Contacting time of
soldering iron tip
Soldering
: ∅ 0.6
: 941 made by Hakko
: T1-1BC
: 300 ± 10 ° C
: within 2 sec