Connecting Power, Chassis Fans, And Panel - ECS P6BAT-B Manual

Connecting Power, Chassis Fans, and Panel

After you have installed the mainboard into the system case, connect the
power cable from the case power supply unit to one of the mainboard
power connectors PW1 or PW2. Connect the chassis fan (if your case
has one) to the 12V power supply connectors FAN2. Then connect the
case switches and indicators to the J10 panel connector on the
mainboard.
PW1
PW2
Power Connector
This mainboard has two power connectors. If you are using an ATX
power supply, connect the power cable from the ATX power supply unit
to PW1. If you are using an AT power supply, connect the power cable
from the AT power supply unit to PW2.
Chassis Fan
If your case has a cooling fan installed in the chassis, plug the cable
from the chassis-mounted fan into the mainboard 12V power supply
connector FAN2.
FAN2
J10
19