Installing The Tread Xl - Baja Chase Edition Device; Mounting And Powering The Device In Your Vehicle - Garmin TREAD XL BAJA CHASE EDITION Owner's Manual

Installing the Tread XL - Baja Chase Edition Device

Mounting and Powering the Device in Your Vehicle

WARNING
This product contains a lithium-ion battery. To prevent the possibility of personal injury or product damage
caused by battery exposure to extreme heat, store the device out of direct sunlight.
Both the device and its mount contain magnets. Under certain circumstances, magnets may cause interference
with some internal medical devices and electronic devices, including pacemakers, insulin pumps, or hard drives
in laptop computers. Keep the device away from medical devices and electronic devices.
Before you use your device on battery power, you should charge it.
1 Open the lever , press the suction cup to the windshield, and flip the lever back toward the windshield.
The lever must be oriented toward the top of the windshield.
2 Tighten the knob slightly.
3 If necessary, adjust the mount for better viewing and operation.
4 Tighten the knob to secure the mount.
5 Connect the vehicle power cable to the cable on the mount.
6 Tighten the collar around the connected power cables.
7 Plug the other end of the vehicle power cable into a power outlet in your vehicle.
14 Installation