Table of Contents
Advertisement
Customizing the Map
Customizing the Map Layers
You can customize which data appear on the map, such as topographic maps and BirdsEye imagery.
1 Select
> Tools >
2 Select the check box next to each layer you want to show on the map.
Viewing the Public Lands Map Key
Public lands are color-coded on the map to show who owns a specific plot of land. For example, you can see if
a plot of land is privately owned or if it is part of a national park. You must enable the public lands map layer to
use this feature
(Customizing the Map Layers,
You can view the legend for these colors on the device.
Select
> Map Display > Map Layers >
Enabling Adventure Roads and Trails Map Layers
You can enable or disable map layers that display accessible or inaccessible roads for different types of motor
vehicles.
1 Select
> Tools >
2 Select a road or trail type.
Changing the Map Data Field
1 From the map, select a data field.
NOTE: You cannot customize Speed.
2 Select a type of data to display.
Changing the Map Buttons
1 From the map, hold a map button.
2 Select an option:
• To replace a map button, select a map button, and select a map button to display.
• To remove a map button, select
3 Select Save.
Changing the Map Perspective
1 Select
> Tools >
2 Select an option:
• Select Track Up to display the map in two dimensions (2D), with your direction of travel at the top.
• Select North Up to display the map in 2D with north at the top.
• Select 3-D to display the map in three dimensions.
• Select Auto Zoom to Group to automatically adjust the zoom level so all riders in a group ride are visible
on the map.
NOTE: This setting is available only while using the group ride feature.
3 Select Save.
30
> Map Display > Map Layers.
page 30).
> Public Lands.
> Map Display > Map Layers >
.
> Map Display > Driving Map View.
> Adventure Roads & Trails.
Using the Map
Advertisement
Table of Contents
Troubleshooting
