Mitsubishi Diamond Plus 120U User Manual page 17

Group
Item
Icon
Icon
GEOMETRY RESET
H-CONVERGENCE
V-CONVERGENCE
V-CONVERGENCE-TOP
V-CONVERGENCE-BOTTOM
CORNER PURITY(TL)
CORNER PURITY(TR)
CORNER PURITY(BL)
CORNER PURITY(BR)
MOIRE CANCEL
MOIRE CANCEL LEVEL
CLAMP PULSE POSITION
POWER SAVE
CONTROL LOCK
OSD POSITION
GTF AUTO ADJUST
N O T E
CONTROL LOCK: This is to lock the OSD function to keep the OSD screen image you set.
Press plus button to lock the OSD function. You can adjust only "BRIGHT" and "CONTRAST" at the condition.
Press minus button to unlock the locked condition.
GTF: This function is available when the computer has the GTF
Press the Minus Button
Item
To select "SHARP" mode.
TEXT MODE
To move the red to the left and
the blue to the right.
To move the red to the upper and
the blue to the lower.
To move the red to the upper and
the blue to the lower of top screen.
To move the red to the upper and the
blue to the lower on the bottom screen.
To adjust the purity condition on the top-left corner.
To adjust the purity condition on the top-right corner.
To adjust the purity condition on the bottom-left corner.
To adjust the purity condition on the bottom-right corner.
To select the Moire Cancel mode
off.
To decrease the level of the moire-clear wave.
To eliminate an excessive green or white-back ground that may
occur when both Sync-On-Green and external sync signals are
applied to the monitor.
To clamp the video signal at
the front of the H-Sync pulse.
To select 1.0V of video input.
VIDEO LEVEL
DEGAUSS
To select the constant power
consumption mode.
To unlock the OSD function.
To move the OSD screen
position to the left.
ALL RESET
It shows the current scanning frequency and Preset No.
DIAGNOSIS
To choose the language used on OSD.
LANGUAGE
ENG......English, FRA......French,
ITA......Italian, GER......German,
TM
function according to the VESA
- 17 -
Press the Plus Button
To restore to factory preset level.
To select "SMOOTH" mode.
To move the red to the right and
the blue to the left.
To move the red to the lower and
the blue to the upper.
To move the red to the lower and
the blue to the upper of top screen.
To move the red to the lower and the
blue to the upper on the bottom screen.
To select the Moire Cancel mode
on.
To clamp the video signal at
the back of the H-Sync pulse.
If you connect to Macintosh,
press plus buton.
To select 0.7V of video input.
To eliminate possible color shad-
ing or impurity.
To select the power-save mode.
To lock the OSD function except for
"BRIGHT" and "CONTRAST".
To move the OSD screen
position to the right.
To restore all items to the factory
preset.
To adjust screen size, position and
distortions automatically.
ESP......Spanish,
JPN......Japanese
® TM
GTF standard.