Epson EB-S01 Service Manual page 48

EB-S01/W01/X14G/S11/X11/S02/S02H/X02/W02/S12/S12H/X12/W12/X14 EH-TW480
Connector
Destination
No.
Code
RS Board
CN1105 (EB-S11/X11 ---
only)
CN1200 TH Board (1)
SE
CN1201 TH Board (2)
CN1203 INT Fan
CN1205 EX Fan FN
CN1206 Lamp Fan
CN3301 Speaker ---
SEIKO EPSON
Error Information
Name
When pressing the power button, initialization starts normally, then the projection starts. But
---
the RS-232 cannot be used.
Sensor error occurs while initializing, and LEDs indicate the error, then the projector turns
Sensor error
into the abnormal stand-by status.
Fan error occurs while initializing and LEDs indicate the error, then the projector turns into
Fan error
the abnormal stand-by status.
When pressing the power button, initialization starts normally, then the projection starts.
--- Audio controller on screen display appears, but no sound is output from the speaker even if
the audio input is applied.
Troubleshooting
Status
48
CONFIDENTIAL
Reference
"Troubleshooting on Operation
Abnormality (p.41)"
"Troubleshooting from the Error
Code on Cooling System Errors
(p.35)"
"TroubleShooting on Audio
Input/Output (p.40)"
Revision C