Epson EB-S01 Service Manual page 123

EB-S01/W01/X14G/S11/X11/S02/S02H/X02/W02/S12/S12H/X12/W12/X14 EH-TW480
When reassembling the LIGHT GUIDE,UPPER, make sure to re-install the N
POLARIZER ADJUST ASSY;G;AS into the correct location taking care not to
damage it or mis-align the adjusted parts.
2. Remove the N POLARIZER UNIT;B.
3. Remove the N POLARIZER UNIT;R.
N POLARIZER UNIT;R
SEIKO EPSON
N POLARIZER UNIT;B
Figure 4-5.
Maintenance
Insert the N POLARIZER UNIT;B and N POLARIZER UNIT;R without
any gap between the bottom of them and the Lower Light Guide Assy.
Install the N POLARIZER UNIT;B taking care in the following instructions.
•
Black marking on the top right as seen from the incidence side.
•
Hold the edges of the N POLARIZER UNIT;B, and make sure not to
touch the polarizer surface.
N POLARIZER UNIT;B
123
CONFIDENTIAL
N POLARIZER UNIT;B/R
No gap in between
LIGHT GUIDE,LOWER
Figure 4-6.
Black Marking
The side with the polarizer
attached
Incidence side
Figure 4-7.
Revision C