Epson EB-S01 Service Manual page 30

EB-S01/W01/X14G/S11/X11/S02/S02H/X02/W02/S12/S12H/X12/W12/X14 EH-TW480
Warning Status
ON Blink OFF
LED Status Cause
High Temp
Warning
Red
Orange
Warning to
replace Lamp
Orange
SEIKO EPSON
Varies according to the projector status
Status/Check point
This is not an abnormality. However, if the
temperature continues to rise higher afterwards,
projection stops automatically.
[Remedy]
Check that the air filter and the exhaust vent
are clear, and that the projector is not placed
against a wall.
If the air filter is clogged, clean or replace it.
Replace the lamp with a new one.
Troubleshooting
30
CONFIDENTIAL
Revision C