Table of Contents
Advertisement
5.3 Cable replacement
Power voltage
Danger of electrocution
• Disconnect the mains power supply.
1. Unscrew the 6 screws on the rear casing.
Position of the screws and the power cable
(rear view)
2. Lift the rear casing slightly and remove it
to gain access to the terminal board.
3. Replace the cable.
4. Make sure that the cables (for the oven
or any hob) follow the best route in order
to avoid any contact with the appliance.
86
Installation
5.4 Positioning
• Position the appliance into the cabinet
cut-out with the help of a second person.
• Never use the oven door to lever the
appliance into place when fitting.
• Avoid exerting too much pressure on the
oven door when open.
• Check that the carcase material is heat
resistant.
• Check that the carcase has the required
openings.
• Do not install the appliance in a recess
which can be closed with a door, or in a
cupboard.
Heavy appliance
Crushing hazard
Pressure on the open door
Risk of damage to the appliance
Heat production during appliance
operation
Risk of fire
Advertisement
Table of Contents
