Table of Contents
Advertisement
5.2 Cable replacement
Power voltage
Danger of electrocution
• Disconnect the main power supply.
1. Unscrew the rear casing screws and
remove the casing to access the terminal
board.
2. Replace the cable.
3. Make sure that the cables (for the oven
or any hob) follow the best route in order
to avoid any contact with the appliance.
38
Installation
5.3 Positioning
• Place the appliance into the piece of
furniture with the aid of a second person.
• Never use the oven door to lever the
appliance into place when fitting.
• Avoid exerting too much pressure on the
oven door when open.
• Check that the piece of furniture material
is heat resistant.
• Check that the piece of furniture has the
required slots.
Heavy appliance
Danger of crush injuries
Pressure on the open door
Risk of damages to the appliance
Heat production during appliance
operation
Risk of fire
Advertisement
Table of Contents
