Changing The Hold And Cook More Times - Prince Castle EHB34-2 Series Service Manual

The SET PRODUCT TIME menu is used to change the Hold and Cook-More times.
1
Press and hold the PRINCE CASTLE LOGO button on the button bar,
then immediately press and hold the MENU/ENTER button until the display shows one of six programming menus.
Use the black UP or DOWN arrows to scroll to PROD TIME ↑↓ ENTR.
Press and release the MENU/ENTER button to enter the Set Product Time menu. The display will show BISC TIME ↑↓ ENTR.
2
Use the UP or DOWN Arrow button to scroll through the list of products.
When the desired product is displayed, press the MENU/ENTER button to select it.
NOTE: Holding the UP or DOWN Arrow button for longer than 2 seconds will cause the product list to automatically scroll up or down.
The display will show 60 ↑↓ ENTR.
3
Use the UP or DOWN Arrow button to scroll to the desired
Hold time. When the desired Hold time is displayed, press
the MENU/ENTER button to save the desired Hold time.
NOTE: Hold time cannot be reduced to less than the Cook-More time
plus one minute. NOTE: All times are displayed in minutes only.
For example, 2 and half hours is displayed as 150
The display will show BISCTIME ↑ ↓ENTR. Repeat Steps 2 – 4 for any other product.
5
Press and release the PRINCE CASTLE LOGO button at any time to exit the Program Mode and return to the Run Mode.
NOTE: If the MENU/ENTER button has not been pressed to save any changes, the program will revert to the original values.
540-577revC-EN
Changing the Hold and Cook-More Times
The display will show 18 ↑ ↓ ENTR.
4
Use the UP or DOWN Arrow button to scroll to the desired
Cook-More time. When the desired Cook-More time is
displayed, press the MENU/ENTER button to save it.
NOTE: Cook-More time cannot be increased to more than the
Hold time, minus one minute.
9 Printed in USA 10/19 © 2019
Extend Holding Bin
EHB34-2 Series