Changing Product/Timer Alternating Time - Prince Castle EHB34-2 Series Service Manual

Extend Holding Bin
EHB34-2 Series
1
The SET ALTERNATING TIME menu is used to change the frequency of flashing between Product and Time Left on timer.
Press and hold the PRINCE CASTLE LOGO button on the button bar,
then immediately press and hold the MENU/ENTER button until the display shows one of six programming menus.
Use the black UP or DOWN Arrow button to scroll to the ALT TIME ↑ ↓ ENTR
Press the MENU/ENTER button to enter the menu.
2
Bar will display ALT 01 ↑ ↓ ENTR as the default of 1-second alternating frequency.
3
Use the UP and DOWN arrows to increase or decrease the desired alternating frequency.
Press the MENU/ENTER button to confirm the selection. Press the PRINCE CASTLE LOGO button to save the setting.
Printed in USA 10/19 © 2019

Changing Product/Timer Alternating Time

(Set Alternating Time) menu.
12 540-577revC-EN