Changing Alarm Volume - Prince Castle EHB34-2 Series Service Manual

1
The SET ALARM VOLUME menu is used to change the volume of the alarm that sounds when a product has expired.
Press and hold the PRINCE CASTLE LOGO button on the button bar,
then immediately press and hold the MENU/ENTER button until the display shows one of six programming menus.
Use the black UP or DOWN Arrow button to scroll to the SET VOL X ↑ ↓ ENTR
Press the MENU/ENTER button to enter the menu.
2
Bar will display SET VOL3 ↑ ↓ ENTR and the number will be blinking.
3
Use the UP and DOWN arrows to increase or decrease the desired alarm volume.
Press the MENU/ENTER button to confirm the selection. Press the PRINCE CASTLE LOGO button to save the setting.
540-577revC-EN

Changing Alarm Volume

13
Extend Holding Bin
EHB34-2 Series
(Set Alarm Volume) menu.
Printed in USA 10/19 © 2019