Safety Information; Model Specifications; Installation - Prince Castle EHB34-2 Series Service Manual

Extend holding bin
Hide thumbs Also See for EHB34-2 Series:
Table of Contents

Advertisement

STYLE
WIDTH (mm) HEIGHT (mm)
3H X 4W
33.2" (843)
NOTE:
Weight (kgs) is product weight.

Safety Information

Indicates information important to the proper operation of the
unit. Failure to observe may result in damage to the equip-
ment and/or severe bodily injury or death.
Indicates information important to the operation of the unit.
Failure to observe may result in damage to the equipment.
This application is not intended for use by persons (including children) with reduced physical, sensory
WARNING:
or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
Remove the unit from the carton and inspect for signs of
1
damage. If there is damage to the unit:
notify the carrier within 24 hours of delivery
save carton and packaging materials for inspection pur-
poses
contact your local dealer, or if purchased directly,
the Prince Castle Sales Department at 800-722-7853
or 1-630-462-8800 to arrange for a replacement unit.
NOTE: Plug the power cord into the proper electrical
receptacle. All electrical connections must be in accordance
with local electrical codes and any other applicable codes.
Place Holding Bin on flat surface.
2
Clearances: 6" sides, 24 " front and back.
Remove blue and/or white protective covering.
NOTE: When installing this unit, the ambient temperature
at the mounting site should not exceed 100°F (38°C)
540-577revC-EN

Model Specifications

DEPTH (mm)
16.2" (413)
14.1" (358)
WARNING
CAUTION
WEIGHT (kgs) VOLTAGE
83 lbs (38)
208-240V
Prince Castle reserves the right to change
specifications and product design without notice.
Such revisions do not entitle the buyer to
corresponding changes, improvements, additions or
replacements for previously purchased equipment.
Children shall not play with appliance.
Cleaning and user maintenance shall not be made by
children without supervision

Installation

Plug unit into a grounded
3
receptacle with a match-
ing plug configuration.
WARNING:
All electrical connections must be in accordance with
local electrical codes and any other applicable codes.
If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent, or similarly
qualified persons in order to avoid a hazard.
To prevent an electric shock hazard this device must
be bonded to equipment in close proximity with an
equipotential bonding conductor.
This device is equipped with a
grounding lug (identified with the
symbol at right) for this purpose.
3
Extend Holding Bin
EHB34-2 Series
WATTS
PLUG
2820-3760W
See pg. 2
Important
Printed in USA 10/19 © 2019

Advertisement

Table of Contents
loading

Table of Contents