Backing Up And Restoring Settings; Backing Up Settings; Restore Settings; Resetting All Settings - Bosch Air Center Control User Manual

Controller settings
18.7

Backing up and restoring settings

You can back up all user-specific settings to USB stick on the Save
settings page. You can use the backup to restore the user-specific
settings following a reset.
To call up the page Save settings:
▶ Dashboard > Controller settings > Save settings
-or-
▶ Header > > Controller settings > Save settings
The Save settings page appears.
 8.2 "Header"
 8.1 "Dashboard"
 18.8 "Resetting all settings"
 18.7.2 "Restore settings"

18.7.1 Backing up settings

To back up the user-specific settings to USB stick:
▶ Select Save settings.
The Save settings dialogue box appears and the backup process
starts. A further dialogue box appears once the backup is finished.
▶ Plug USB stick into the central controller.
▶ Select Ok.
The user-specific settings are backed up on the USB stick.

18.7.2 Restore settings

Backup settings can be restored via the configuration wizard after all
settings have been reset, or on a brand new central controller.
To restore the user-specific backup settings:
▶ Insert USB stick containing the backup settings into the central
controller.
▶ Select Restore settings below the country selection in the
configuration wizard.
The dialogue box containing the directory structure of the USB stick
appears.
▶ Select file.
▶ Select Confirm.
▶ Enter the access data of any administrator account that was saved on
the central controller at the time the backup was created.
The restoration process starts. Once the settings have been
successfully restored, the Login dialogue box is displayed.
 6.1 "Configuration wizard"
 18.8 "Resetting all settings"
 8.5 "Log user in and out"
52
18.8

Resetting all settings

You can restore the factory settings for all user-specific settings and
delete the settings for schedules, groups or floor plans on the Backup &
Reset page. The configuration wizard appears when started for the first
time after resetting. Previously backed-up settings can be restored.
To call up the page Backup & Reset:
▶ Dashboard > Controller settings> Backup & Reset
-or-
▶ Header > > Controller settings > Backup & Reset
The Warning dialogue box appears.
To restore the factory settings for all settings:
▶ Select Confirm.
All settings are reset.
To cancel the operation:
▶ Select Cancel.
 8.2 "Header"
 8.1 "Dashboard"
 6.1 "Configuration wizard"
 18.7 "Backing up and restoring settings"
 16.2.4 "Scan VRF system (system scan)"
18.9

Restarting

You can restart the central controller via the Restart page. No data is lost
during this process and all user-specific settings are retained.
To call up the page Restart:
▶ Dashboard > Controller settings> Restart
-or-
▶ Header > > Controller settings > Restart
The Warning dialogue box appears.
To restart the central controller:
▶ Select Confirm.
The central controller is restarted. The Login dialogue box appears.
To cancel the operation:
▶ Select Cancel.
 8.2 "Header"
 8.1 "Dashboard"
 8.5 "Log user in and out"
Air Center Control – 6720892123 (2020/06)