Resetting To Factory Settings; Simplified Declaration Of Conformity; Environmental Protection And Disposal - Bosch Smart Home controller II Quick Instructions

Resetting to factory settings

You have two options for resetting the Smart Home
controller to the factory settings:
1. Reset using the Bosch Smart Home app 1. Reset using the Bosch Smart Home app
Go to "More" then "System" in the app and select
"Factory settings". Follow the instructions.
2. Reset using the reset button 2. Reset using the reset button
Press the reset button (5) until the status LEDs (2, 3, 4)
on the front flash red, release it briefly and press and
hold it again until the LEDs light yellow. The device then
restarts. Please note that it can take a few minutes until
the controller is ready for operation again.
When resetting the Smart Home controller to the
factory settings (using the app or the reset button),
only the Smart Home controller is reset. All Smart
Home devices which were previously integrated
should be manually reset after resetting the
controller.
Maintenance and cleaning
The device does not require maintenance. Leave any
repairs to a specialist. Clean the device with a soft,
clean, dry and lint-free cloth. When cleaning, do not use
any cleaning agents containing solvents.

Simplified declaration of conformity

Robert Bosch Smart Home GmbH hereby declares
that the radio equipment type BSHC-2 complies
with Directive 2014/53/EU. The complete text of the EU
declaration of conformity is available via the following
web address: https://eu-doc.bosch.com
Robert Bosch Smart Home GmbH hereby declares
that the radio system type BSHC-2 complies with
Regulation 2017. The full text of the declaration of
conformity is available at the following internet address:
https://gb-doc.bosch.com

Environmental protection and disposal

Electrical or electronic devices which are no
longer usable must be collected separately and
disposed of via an environmentally friendly
recycling facility (European Directive on Waste Electrical
and Electronic Equipment). Use your country's specific
return and collection systems when disposing of waste
electrical or electronic devices.