PXI-CORE Edge controller
4.2.4
Battery case GB01
An internal battery is included and working in the device upon delivery. The battery is used to
extend the buffer time of the real‑time internal clock. A circuit monitors the battery state. A
discharged battery causes an incorrect system time.
–
5
Web-based graphical user interface
5.1
User
The user <user name> currently logged in is shown on the top right‑side of the PXI‑CORE web
interface, next to the (person) icon button. For more information, refer to Users &
Permissions, page 18 .
5.1.1
Change the password
To change the logged‑in user password:
1.
2.
3.
4.
5.1.2
Logging out
To log out from the PXI‑CORE web server:
1.
2.
3.
5.2
Settings
The Settings menu is used to browse through the system configuration sections.
4
–
–
–
–
–
–
–
–
–
–
5.2.1
Connectivity
The Connectivity setting is used to manage and configure network IP settings. One static IP
address is already configured for eth0 upon delivery. Both eth0 (XF10) and eth1 (XF51) have
DHCP enabled by default.
Use this menu to make any changes to the IP configuration.
Bosch Security Systems B.V.
For instructions on changing the battery, refer to Maintenance > Battery change, page
24 .
Click the <user name> top right icon:
Click Change password.
In the Change password dialog, enter the old and new password, and confirm with the
new password.
Click the Change password button to confirm.
Click the <user name> top right icon.
Click Log out.
In the dialog, click the Log out button or Cancel button:
–
At logout, the Login page reloads.
Click the Settings button in the left side navigation bar to select:
Connectivity, page 17 .
Date & Time, page 18 .
Users & Permissions, page 18 .
Certificates & Keys, page 18 .
SSH, page 18 .
Proxy, page 18 .
Storage, page 18 .
Shutdown, page 18 .
Licenses, page 18 .
Information, page 18 .
Web-based graphical user interface | en
User manual
17
2023-03 | V01 | F01U395004