Nvidia ConnectX-6 User Manual page 90

Connector: Single QSFP56 InfiniBand and Ethernet (copper and optical)
Protocol
InfiniBand: IBTA v1.4
Support
Auto-Negotiation: 1X/2X/4X SDR (2.5Gb/s per lane), DDR (5Gb/s per lane), QDR (10Gb/s per
lane), FDR10 (10.3125Gb/s per lane), FDR (14.0625Gb/s per lane), EDR (25Gb/s per lane)
port, HDR100 (2 lane x 50Gb/s per lane), HDR (50Gb/s per lane) port
Ethernet: 200GBASE-CR4, 200GBASE-KR4, 200GBASE-SR4, 100GBASE-CR4, 100GBASE-KR4,
100GBASE-SR4, 50GBASE-R2, 50GBASE-R4, 40GBASE-CR4, 40GBASE-KR4, 40GBASE-SR4,
40GBASE-LR4, 40GBASE-ER4, 40GBASE-R2, 25GBASE-R, 20GBASE-KR2, 10GBASE-LR,10GBASE-
ER, 10GBASE-CX4, 10GBASE-CR, 10GBASE-KR, SGMII, 1000BASE-CX, 1000BASE-KX, 10GBASE-SR
Data Rate
Gen3: SERDES @ 8.0GT/s/, x16 lanes (2.0 and 1.1 compatible)
Adapter
Voltage: 12V, 3.3VAUX
Card Power
Typical Power
Maximum Power
Voltage: 3.3Aux
Maximum
Maximum power available through QSFP56 port: 5W
Active
Typical Power
Auxiliary
PCIe
Maximum Power
Connection
Card Power
Environmen
Temperature
tal
Humidity: 90% relative humidity
a
InfiniBand
Ethernet
Power
b
Passive Cables
Please refer to ConnectX-6 VPI Power Specifications (requires
NVONline login credentials)
current: 100mA
3.0W
4.0W
Operational
Non-operational
c
SDR/DDR/QDR/FDR/EDR/HDR100/
HDR
1/10/25/40/50/100/200 Gb/s
Cable
27.1W
0°C to 55°C
-40°C to 70°C
90