Nvidia ConnectX-6 User Manual page 68


If no reboot options are specified, the installer restarts the computer whenever necessary
without displaying any prompt or warning to the user.
To control the reboots, use the /norestart or /forcerestart standard command-line options.
The following is an example of an unattended installation session.
1. Open a CMD console-> Click Start-> Task Manager File-> Run new task-> and enter CMD.
2. Install the driver. Run:
MLNX_WinOF2-[Driver/Version]_<revision_version>_All_Arch.exe /S /v/qn
3. [Optional] Manually configure your setup to contain the logs option:
_All_Arch.exe /S /v/qn /v"/l*vx [Log- File]""
4. [Optional] if you wish to control whether to install ND provider or not (i.e., MT_NDPROPERTY
default value is True).
MLNX_WinOF2-[Driver/Version]_<revision_version>_All_Arch.exe
5. [Optional] If you do not wish to upgrade your firmware version
(i.e.,MT_SKIPFWUPGRD default value is False).
MLNX_WinOF2-[Driver/Version]_<revision_version>_All_Arch.exe
Installation Results
Upon installation completion, you can verify the successful addition of the network card(s) through
the Device Manager. The inf files can be located at:
%ProgramFiles%\Mellanox\MLNX_WinOF2\Drivers\
To see the NVIDIA network adapters, display the Device Manager and pull down the "Network
adapters" menu.
v:shapes="_x0000_s1026">
/vMT_NDPROPERTY=1
/vMT_SKIPFWUPGRD=1
68