Nvidia ConnectX-6 User Manual page 38

Infiniband/vpi adapter card

Hide thumbs Also See for ConnectX-6:

Table of Contents

Step 5: Slide the Cabline CA-II Plus harnesses through the retention clip. Make sure that the

clip opening is facing the plugs.

Step 6: Plug the Cabline CA-II Plus harnesses on the PCIe Auxiliary Card. As indicated on

both sides of the Auxiliary connection card; plug the black harness to the component side and

the white harness to the print side.

Step 7: Verify the plugs are locked.

Step 8: Slide the retention clip through the cutouts on the PCB. Make sure latches are facing

"Black Cable" annotation as seen in the below picture.

Table of Contents

Troubleshooting