Nvidia ConnectX-6 User Manual page 13

into two 16-lane buses, with one bus accessible through a PCIe x16 edge connector and the other
bus through an x16 Auxiliary PCIe Connection card. The two cards should be installed into two PCIe
x16 slots and connected using two Cabline SA-II Plus harnesses, as shown in the below figure.
Part Number
Form Factor/Dimensions
Data Transmission Rate
Network Connector Type
PCIe x16 through Edge Connector PCIe Gen 3.0 / 4.0SERDES@ 8.0GT/s / 16.0GT/s
PCIe x16 through Auxiliary Card
RoHS
Adapter IC Part Number
MCX654105A-
MCX65410
HCAT
6A-HCAT
Adapter Card: PCIe Half Height, Half Length / 167.65mm x 68.90mm
Auxiliary PCIe Connection Card: 5.09 in. x 2.32 in. (129.30mm x 59.00mm)
Two 35cm Cabline CA-II Plus harnesses
Ethernet: 10/25/40/50/100/200
Gb/s
InfiniBand: SDR, DDR, QDR, FDR,
EDR, HDR100, HDR
Single-port Dual-port QSFP56
QSFP56
PCIe Gen 3.0SERDES@ 8.0GT/s
RoHS Compliant
MT28908A0-XCCF-HVM
MCX654106A-ECAT
Ethernet: 10/25/40/50/100 Gb/s
InfiniBand: SDR, DDR, QDR, FDR, EDR,
HDR100
13