• LED 3 and 4: Reserved for future use.
LED1 and LED2 Link Status Indications - Ethernet Protocol:
LED Color and State
Off
Beacon command for locating the adapter card
Error
Solid green
Blinking green
LED1 and LED2 Link Status Indications - InfiniBand Protocol:
LED Color and State
Off
Beacon command for locating the adapter card
A link has not been established
1Hz blinking Yellow
4Hz blinking Yellow Indicates an error with the link. The
error can be one of the following:
Error Type
Description
2
I
C access to the
2
networking ports
I
C
fails
Over-current
Over-current
condition of the
networking ports
Indicates a valid link with no active traffic
Indicates a valid link with active traffic
A link has not been established
1Hz blinking Yellow
Description
LED Behavior
Blinks until error
is fixed
Blinks until error
is fixed
Description
21