Rear Panel - Icom IC-7200 Instruction Manual

1
PANEL DESCRIPTION
■

Rear panel

q TUNER CONTROL SOCKET [TUNER] (p. 11)
Accepts the control cable from an optional antenna
tuner.
w GROUND TERMINAL [GND] (p. 8)
Connects to a ground to prevent electrical shocks,
TVI, BCI and other problems.
e DC POWER SOCKET [DC 13.8V] (p. 10)
Accepts 13.8 V DC through the supplied DC power
cable.
r ACCESSORY SOCKET [ACC]
Enables connection to external equipment such as
a TNC for data communications, a linear amplifier or
an automatic antenna tuner, and so on.
• See the PDF type Advanced Instructions for socket wir-
ing information.
t ELECTRONIC KEYER JACK [KEY]
Accepts a key or paddle connector for the internal
electronic keyer.
• The keyer type selection between the internal electronic
keyer and straight key operation can be made in the Set
mode. (p. 33)
When connecting
a straight key
When connecting
a paddle
If you use an external electronic keyer, make sure
the output voltage of the keyer is less than 0.4 V
when keying the transmitter.
7
TUNER GND DC 13.8V
q w e
Rear panel view
(⊕)
(dot)
(com)
(dash)
REMOTE E X T SP
KEY SEND ALC
ACC
r t y u
y SEND CONTROL JACK [SEND]
Goes to ground while transmitting to control exter-
nal equipment such as a linear amplifier.
• Max. control level: 16 V DC/0.5 A
u ALC INPUT JACK [ALC]
Connects to the ALC output jack of a non-Icom lin-
ear amplifier.
i ANTENNA CONNECTOR [ANT] (p. 8)
Accepts a PL-259 connector and a 50 Ω coaxial
cable from an antenna tuner or an antenna.
o CI-V REMOTE CONTROL JACK [REMOTE]
➥ Designed for use with a PC for remote control of
the transceiver functions.
➥ Used for transceiver operation with another Icom
CI-V transceiver or receiver.
!0 EXTERNAL SPEAKER JACK [EXT SP]
Connects a 4–8 ø external speaker.
• When an external speaker is connected, the internal
speaker is disabled.
!1 USB (Universal Serial Bus) PORT [
Connects a USB cable for transceiver modulation
input, the transceiver operation with a PC, and the
received audio sent to the PC.
About the USB driver:
The USB driver and the installation guide can be
downloaded from our website.
➥
http://www.icom.co.jp/world/
!1
!0
o
i
ANT
]