Table of Contents
Advertisement
MICROBOARDS TECHNOLOGY, LLC
Software Re-Installation
The information in this section will only apply to a manual re-installation of the individual software
packages. If you have not yet installed the PF-3 Print Factory using the Installer, it is recommended
that you do so. Installing the PF-3 Print Factory in an incorrect order could result in an unsuccessful
installation.
Toolbox Re-Installation
The Microboards Toolbox will be installed automatically during the initial installation of the PF-3 Print
Factory from the Installation CD. The Toolbox installation is hidden at that time, but the successful
installation of the Toolbox can be verified by the presence of the Toolbox icon on your Windows
desktop.
There are 2 methods of reinstalling the Toolbox should the need arise:
A. (Recommended) Load the Installation CD and select the Repair option when the installer
starts.
Click the Microboards PF-3 Toolbox button to reinstall the Toolbox or the Install Both
Applications button to reinstall both SureThing Disc Labeler and the Toolbox.
B. Open the Applications directory on the Installation CD and copy the file Toolbox.exe to the
C:\Program Files\Microboards\PF3 Print Factory\Toolbox directory on your PC (if your PC
does not boot off the C: drive, use the correct drive letter instead). The application is stand-
alone and can be placed anywhere on the PC, but it will not automatically launch when
Windows is started unless it is in this directory.
17
PF-3 PRINT FACTORY
Advertisement
Table of Contents
