Table of Contents
Advertisement
Ink Tab
The Ink tab provides you with the approximate remaining Ink Levels as a percentage of the full
cartridge capacity.
cartridges were full when installed in the printer.
The Color Ink percentage is based on the lowest remaining of the 3 colors.
To view the approximate levels of each individual color, click the Advanced
Ink Levels button.
beginning or end of a print job; if you are printing a large number of discs, the
overall Color Ink level on the main tab is a better indication of the true ink
level remaining.
Also on the Ink tab are the Ink Cartridge Replacement model numbers.
Alignment Tab
The Alignment tab allows you to change the printer alignment.
Alignment
The Resolution setting will specify whether the alignment
values are measured in 1mm or 0.1mm increments.
0.1mm setting is more precise and should always be used.
The Alignment values will move the print image on the disc.
Increasing the Top alignment value will move the print image down on the disc, while decreasing it
will move the image up on the disc. Increasing the Left alignment value will move the print image to
the right on the disc, while decreasing it will move the image left.
Use the accompanying graphic on the Alignment
tab as a guide for what needs to be done if the
image is not centered.
About Tab
The About tab provides you with contact information for the worldwide Microboards offices.
• Assembly and Installation
14
These are approximations only, and are based on the assumption that the
The individual color levels are only updated at the
The
Advertisement
Table of Contents
