Table of Contents
Advertisement
System Requirements
The Microboards PF-3 Print Factory has the following minimum requirements and compatibilities:
Supported Operating Systems
Microsoft Windows 2000 with SP4, Windows XP with SP2, or Windows Vista.
Processor
Pentium 4 (or equivalent) CPU, running at 2.0 GHz or faster.
System Memory
A minimum of 512 MB is required; a minimum of 1 GB is recommended.
Hard Drive Space
Approximately 115 MB of free space is required for the applications and drivers.
USB Connection
USB 2.0 is required.
Assembly and Installation
Assembly Instructions
PF-3 Print Factory Assembly
Remove the PF-3 Print Factory system from the shipping box and confirm you received all of the
items.
Place the PF-3 Print Factory on a stable, flat surface. You will need
room both in front and behind the system, as discs will be accessed
from both locations.
Install the 2 long input bin posts into the input hopper by screwing them
down onto the screw mounts on the left side of the input hopper. Install
the wide post on the right side of the input hopper.
Install the output bin:
•
Align the two holes in the output bin with the holes on the front of the printer (numbers 1 and 2).
•
Secure the output bin with the two thumb screws.
•
The output bin should now be securely in place.
•
Next, slide in the 100 disc output spindle into place.
The output bin is designed to hang over the front edge of your work
surface.
Plug in the PF-3 Print Factory with the AC power cord provided.
Turn on the PF-3 using the switch on the back of the unit.
• Assembly and Installation
6
1
2
Advertisement
Table of Contents
