Manual Software Re-Installation - MicroBoards Technology GX User Manual

MICROBOARDS TECHNOLOGY, LLC

Manual Software Re-Installation

This section will only apply to a manual re-installation of the SureThing software package. If you
have not yet installed the GX Disc Printer using the Installer, it is recommended that you do so.
There are 3 methods of reinstalling SureThing should the need arise:
A. (Recommended) Insert the Microboards GX Disc Printer Installation CD into the CD/DVD
ROM drive on your computer and select the Repair option when the installer starts. Click the
SureThing Disc Labeler button to reinstall SureThing.
Follow these steps once the SureThing installer launches:
1. Click Next to continue.
2. Once the User License screen
appears, select I Accept and click
the Next button.
3. If you wish to change the default
Install directory, it can be done here.
Click Next when completed.
B. Alternately, you can open the Applications directory on the Installation CD and run
SureThing.exe to install SureThing manually. Follow the on-screen instructions as shown in
steps 1-7 above.
C. The SureThing installer was also added to your hard drive in the event that you need to
reinstall but do not have access to the Installation CD.
C:\Program Files\Microboards\GX Installer\Applications directory on your hard drive.
Follow the on-screen instructions as shown in steps 1-7 above.
17
GX DISC PRINTER
4. Click Next to add a shortcut in the
Start Menu.
5. Choose to add an icon to your
desktop and/or a folder in the Start
Menu. Once selected, click Next.
6. Click Install to begin copying the
files.
7. Remove the check
SureThing at this time, then click
Finish.
Run SureThing.exe in the
to launch