Register A Handset; Reset Phone Settings - VTech XS1050 Manual

Register a handset

When your handset is deregistered
from the telephone base, follow the
steps below to register it back to the
telephone base.
1. Remove the handset from the
telephone base.
2. Press when the phone is not in
use.
3. Press ▼/▲ to choose REGISTRATION,
and then press
• PIN? - - - - displays; - - - - cursor
flashes.
4. Enter the 4-digit system PIN, and
. (Default: 0000)
press
Press and hold
base for about five seconds.
• PLEASE WAIT displays.
• REGISTER! displays if the handset
fails to register to the base.
• If handset is registered to the
base sucessfully, the base will
assign next available handset
number to the handset
automatically.
• You hear a beep when the
registration process completes.
• The registration process takes
about 60 seconds complete.
NOTE
• If your handset is new, make sure
you charge it before attempting
registration.
to select.
at the telephone

Reset phone settings

You can reset your phone to the default
settings. After reset, all settings and
entries (except phonebook)
deleted.
1. Press when the phone is not in
use.
2. Press ▼/▲ to choose DEFAULT, and
then press
• PIN? - - - - displays; - - - - cursor
flashes.
3. Enter the 4-digit system PIN, and
press . (Default: 0000)
4. Press to confirm.
45
will be
to select.