Dect 6.0 cordless telephone with bluetooth wireless technology (68 pages)
Summary of Contents for VTech XS1050
Page 1
1050 1051 1052 1053 Scan the QR code for support information...
Page 2
Important safety instructions. This manual has all the feature operations and troubleshooting necessary to install and operate your new VTech telephone. Please review this manual thoroughly to ensure proper installation and operation of this innovative and feature rich VTech product.
Jiangxi Jian Aohai Technology Co., Ltd. Unplug this product from the wall outlet and refer Model: A318-060045W-EU1 | A318- servicing to VTech/distributor under the following 060045W-UK1. conditions: •...
Page 4
(2014/53/EU) and the UK’s Radio Regulations 2017 on Co., Ltd. radio systems and telecommunication equipment. A318-060045W-EU1 (EU plug) | VTech Telecommunication Ltd. hereby declares that A318-060045W-UK1 (UK plug) this telephone XS1050/XS1051/XS1052/XS1053 is Input: 100-240V AC 50/60Hz 0.15A; in compliance with the essential requirements and Output: 6VDC 0.45A 2.7W...
Page 5
Breakages to the LCD screen are not covered by the warranty. Products returned to VTech Electronics Europe Plc, should be sent to the address shown below and packed carefully to avoid damage in transit. Please do not include batteries or adaptors.
Important safety instructions What is in the box Connect and charge Install the battery Connect the telephone base Connect the charger Charge the battery Check the battery level Check for dial tone If you do not hear a dial tone Set date and time Operating range Handset Overview...
Page 7
Install | Set up Menu navigation In idle mode ANS. MACHINE CALL BLOCKER CALL LIST PHONEBOOK BS SETTINGS HS SETTINGS REGISTRATION DEFAULT...
Page 8
Make, answer or end a call Use the phone menu Predial a call Phonebook Answer a call Add a phonebook entry End a call Review the phonebook entries Turn the handset ringer on/off 21 Add a phonebook entry to Turn the keypad lock on/off VIP list Share call Review VIP entries...
Page 9
Operate Call blocker Set block mode Set the type of calls to be blocked Add a black list entry Review the black list entries Edit a black list entry Delete a black list entry/all entries Retrieve voicemail Answering machine Message playback Control the playback Delete all messages Message indicator on base...
Page 10
Handset settings Register a handset Set languages Reset phone settings Set date and time Answering machine and Set date format settings Set time format Set your built-in answering machine Set date and time Ringer Set the answer mode Set ringer melody Select the answering machine language Set ringer volume...
Page 11
Configure | Settings General product care Taking care of your telephone Avoid rough treatment Avoid water Electrical storms Cleaning your telephone Storage Frequently asked questions...
What is in the box Your telephone package contains the following items. Save your sales receipt and original packaging in case it is necessary to ship your telephone for warranty service. 1 charger set for XS1051 2 charger sets for XS1052 3 charger sets for XS1053...
Connect and charge Connect the telephone base NOTES Install the battery • Use only the adapters provided. • Make sure the electrical outlets are NOTES not controlled by wall switches. • Use only the battery provided. • Connect the power adaptor in a •...
Connect the charger Once you have installed the battery, the handset LCD display indicates the battery status (see the table below). Battery Battery Action indicators status Battery has Charge no charge without or very little interruption charge. The (at least 30 flashes handset minutes).
Check the battery level When it is fully charged, you can expect the following performance: After you have installed the battery, Operation Operating time check the battery level on the handset While in handset use screen. 18 hours (talking*) • If the battery icon is While not in use then go to Set the date and time.
Set date and time Operating range Set the date and time before using the When the handset is out of range, the telephone system. handset displays Out of range or no pwr at base. 1. Press when the phone is not in If there is a call while the handset is out of use.
Handset Overview • Press to review the call list when the telephone is not in use. • Press to scroll up while in a menu or reviewing the phonebook, call list, or redial list. • Press increase listening volume when on a call, or increase the message playback volume.
Handset display icons • Press to display the menu. • Once in the menu, press overview to select an item or save an entry or setting. • Press to make or answer a call using the handset. 8888888888 • Enter space character during text editing.
Telephone base • Steadily ON: When answering machine is on. Overview • Flash: When new TAM message is received. • Line is in use. • Flash when there is an incoming call. • Volume booster feature is turned on. • On when Block mode is New message indicator / Volume turn to On and will block all indicator...
Page 20
Menu navigation ANS. MACHINE CALL BLOCKER • MSG PLAYBACK • BLACK LIST • DEL ALL OLD • SETTINGS In idle mode • MEMO • TAM ON/OFF 1. Press • TAM SETTINGS CALL LIST PHONEBOOK 2. Press ▲/▼ of to scroll to a Under a selected Call list Under a selected menu option.
Make, answer or end a Share call You can use two cordless handsets at a call time on an outside call. Predial a call To make a 3-way conversation 1. Enter the telephone number. 1. Press on the handset during a •...
Call waiting Redial list When you subscribe to call waiting Review a redial list entry service with your telephone service provider, you hear an alert tone if there is 1. Press to enter the redial list. an incoming call while you are on another call.
Find handset NOTE • If there is no number in the list, the display shows EMPTY. This feature helps you find all system handsets. Delete a redial list entry CAUTIONS 1. Press to enter the redial list. • Do not press and hold for more 2.
Use the phone menu Phonebook The phonebook can store up to 100 1. Press when the phone is not in entries which is shared with the black list. use. Each entry may consist of a telephone 2. Press ▼/▲ until the screen displays number up to 24 digits, and a name up the desired feature menu.
6. Press ▼/▲ to choose VIEW, and 5. Press , and then enter the then press to select. telephone number of the entry. • Press to confirm. NOTE • Press to delete. • You hear a double beep when you •...
Review VIP entries 3. When the desired entry displays, press to select. • ADD displays. Entries are sorted alphabetically. 4. Press ▼/▲ to choose DEL FROM VIP 1. Press when the phone is not in and then press to confirm. use.
Remove all VIP entries Dial a phonebook entry 1. Search for the desired entry in the 1. Search for the desired entry in VIP list (see Review VIP entries). the phonebook (see Review the phonebook entries or Review VIP 2. When the desired entry displays, entries).
Call list Delete a phonebook entry/ all entries This feature is available if you have subscribed to the Caller ID service from 1. Search for the desired entry in your local service provider telephone the phonebook (see Review the company. phonebook entries).
Save a call list entry to the Save a call list entry to the phonebook black list 1. Search for the desired call list entry 1. Search for the desired call list entry (see Review the call list). (see Review the call list). 2.
Call blocker NOTE • If you want to delete all call list entries, press ▼/▲ to select DELETE ALL If you have subscribed to Caller ID service, instead of DELETE. you can use the call blocker feature to block certain calls automatically. Set the type of calls to be You can block calls by adding the numbers into the Black List.
will be blocked. • WITHHELD - block all calls that • BLOCK BLIST - Only block calls hide its caller ID. with numbers stored in the Black • INTERNAT’L - block all List. international calls. • UNAVAILABLE - block all calls 6.
Add a black list entry NOTE , and then press ▼/▲ to 1. Press • You hear a double beep when you choose CALL BLOCKER. Press reach the beginning or end of the list. to confirm. Edit a black list entry 2.
Retrieve voicemail NOTE • If you want to delete all black list entries, press ▼/▲ to select DELETE When you received a voicemail, the ALL instead of DELETE. handset displays New voicemail and/or To retrieve, you typically dial an access number provided by your telephone service provider, and then enter a security code.
Answering machine Using the handset: 1. Press when the phone is not in Message playback use. 2. Press to select ANS. MACHINE. If you have new messages, the telephone plays only the new messages again to select MSG 3. Press (oldest first).
Message indicator on base Using the telephone base: • Press to start or stop message playback. Display Description • Press to play the next new 0F-> -- Answering machine is OFF. messsage if available. Answering machine is OFF and • Press to play the current message no new answering machine from the beginning.
Record memo Display Description Flashing - -: Time is not set and Regardless the answering machine is there are old voice messages kept on or off, you can record memos as in the the answering machine reminders for yourself. memory only (no new voice messages).
Remote access NOTES • The must be entered while the Your phone lets you check your outgoing message is still playing, messages, or otherwise operate your and the 4-digit PIN should follow answering machine, by calling the without any delays. answering machine when you are away •...
Turn on/off the answering NOTES • If your answering machine is turned machine off but Remote Access is turned on, By default, your answering machine is the phone will enter into the remote ON. You can select to turn on or off the access mode after 14 rings and play the system.
Handset settings Set date format 1. Follow Set date and time and reach Set languages DATE FORMAT. Press to select. 2. Press ▼/▲ to choose DD-MM-YY or The LCD language is preset to German. You can select English, French, Italian, MM-DD-YY format.
Ringer Set ringer volume You can set the ringer volume or turn the 1. Press when the phone is not in ringer off on each handset. use. When the ringer is off, appears on 2. Press ▼/▲ to choose HS SETTINGS, the screen.
Tone settings Alarm Set key tone on/off Set alarm on/off and alarm time You can turn the key tone on or off for You can set the ALARM alert with each handset. If you turn the key tone handset. off, there are no beeps when you press Set alarm on: the keys.
Base settings Rename handset You can rename the handset for your Ringer easy reference with the base. 1. Press when the phone is not in 1. Press when the phone is not in use. use. 2. Press ▼/▲ to choose HS SETTINGS, 2.
Delete handset Set dial mode The dial mode is preset to touch- 1. Press when the phone is not in tone dialing. If you have pulse (rotary) use. service, you need to change the dial 2. Press ▼/▲ to choose BS SETTINGS, mode to pulse dialing before using the and then press to select.
Change the system PIN Turn on/off ECO mode You can reduce transmission power by 1. Press when the phone is not in setting the ECO mode. use. 2. Press ▼/▲ to choose BS SETTINGS, 1. Press when the phone is not in and then press to select.
Register a handset Reset phone settings When your handset is deregistered You can reset your phone to the default from the telephone base, follow the settings. After reset, all settings and steps below to register it back to the entries (except phonebook) will be telephone base.
Answering machine Set the answer mode The answering machine has two types and settings of answer mode. One is ANS & REC, and the other one is ANSWER ONLY. Set your built-in answering ANS & REC is the default setting, and it answers the calls and allows callers to machine leave a message.
Default outgoing message Play and delete your outgoing message The telephone is preset with a greeting that answers calls with “Hello. Your call 1. Press when the phone is not in cannot be taken at the moment. So use. please leave your message after the 2.
Set answer delay Set record time Use this feature to set the number of Use this feature to set the message rings for the answering machine to pick recording time. up the incoming call. 1. Press when the phone is not in 1.
Turn on/off remote access 5. Enter your current 4-digit remote access PIN. You can turn on or off the remote access • The PIN is masked as ++++ . feature to access your messages. 6. Press to enter or to cancel. 1.
Page 50
General product care Storage When you are not going to use the telephone for some time, unplug the Taking care of your telephone adapter(s), and remove the rechargeable Your cordless telephone contains battery from the handset. Store the sophisticated electronic parts, so it must telephone base, the handset, the be treated with care.
Page 51
Frequently asked questions Below are the questions most frequently asked about the cordless telephone. If you cannot find the answer to your question, visit our website at www.vtechphones.eu. Make sure the telephone base is installed My telephone properly, and battery is installed and does not work charged correctly.