Upgrade Global Controller Or Local Controller From Its User Interface - Cisco MARS Install And Setup Manual

Checklist for Upgrading the Appliance Software
To specify proxy settings, follow these steps:
Open the MARS user interface in your browser.
Step 1
Select Admin > System Parameters > Proxy Settings.
Step 2
In the Proxy Address and Proxy Port fields, enter the address and port used by the proxy server that sits
Step 3
between your appliance and the Internal Upgrade Server.
In the Proxy User field, specify the username that the appliance must use to authenticate to the proxy
Step 4
server.
This username and password pair is neither the Cisco.com nor the Internal Upgrade Server login and
Note
password. MARS requires that proxy servers enforce inline user authentication.Therefore, you must
specify a username and password pair to authenticate to the proxy server.
In the Proxy Password field, specify the password associated with the username you just provided.
Step 5
Click Submit to save your changes.
Step 6

Upgrade Global Controller or Local Controller from its User Interface

Note This procedure is valid for versions 3.4.1 and later.
To upgrade the appliance from the user interface, follow these steps:
Open the MARS user interface in your browser.
Step 1
Select Admin > System Maintenance > Upgrade.
Step 2
Install and Setup Guide for Cisco Security MARS
6-14
Chapter 6 Administering the MARS Appliance
OL-14672-01