Status Led; Installing The Lithium-Ion Battery - Garmin MONTANA 700 Series Owner's Manual

Status LED

The status LED indicates the device status.
LED Activity
Double flashing green
Flashing green
Flashing red
Alternating red and green flashes

Installing the Lithium-ion Battery

1 Locate the Lithium-ion battery pack included in the product box.
2 Verify the gasket and battery compartment are free of debris.
3 Insert the battery pack into the back of the device.
4 Turn the D-ring clockwise to secure the battery pack onto the device.
5 Press the D-ring flat against the back of the device.
You should leave the battery installed in the device to keep moisture and debris away from the battery contacts
and microSD card slot.
Introduction
Status
You have an unread inReach
The device is in expedition mode.
An inReach message failed to send.
The device is below 10-percent battery power.
The device is in SOS mode.
® message.
3