Power Led Status; Acquiring Satellite Signals - Garmin GLO Instruction Manual

Pairing the Sensor
1
Hold to turn on the sensor.
2
Turn on the other device and enable
the Bluetooth component.
You can refer to the device's
documentation for specific instructions
about enabling Bluetooth wireless
technology.
3
Bring the sensor within 30 feet (10
meters) of the mobile device.
4
Using the mobile device, pair the
sensor with the mobile device.
The sensor PIN is 1234.
The blue LED flashes slowly or is on solid
when the sensor is connected to the other
device.
If the sensor has not established a
Bluetooth connection for several minutes,
it turns off automatically.
Bluetooth LED Status
LED Description
Rapid flashing Power on, Bluetooth on
blue
Solid blue Bluetooth connection to the
mobile device established,
satellites not acquired
Slow flashing Bluetooth connection to the
blue mobile device established,
satellites acquired

Power LED Status

LED
Flashing yellow/green Charging
Solid yellow/green
Flashing orange
Solid orange

acquiring Satellite Signals

1
Ensure that the blue LED on the
sensor is slowly flashing blue or
on solid blue, indicating a wireless
connection.
2
Place the sensor where it has a clear
view of the sky.
Acquiring satellite signals may take a few
minutes.
Description
Battery is charged
Low battery
Faulty battery or
system error
3