Device Care; Cleaning The Device; Cleaning The Touchscreen; Data Management - Garmin MONTANA 700 Series Owner's Manual

3 Insert three AA batteries, observing polarity, and close the battery pack.
4 Insert the AA battery pack into the back of the device, turn the D-ring clockwise, and press the D-ring flat
against the back of the device.
5 Hold .
6 Select Setup > System > Battery Type.
7 Select Alkaline, Lithium, NiMH, or Precharged NiMH.
To prevent corrosion, remove the batteries from the battery pack when not in use, and store the battery pack in
a dry location.

Device Care

Do not store the device where prolonged exposure to extreme temperatures can occur, because it can cause
permanent damage.
Never use a hard or sharp object to operate the touchscreen, or damage may result.
Avoid chemical cleaners, solvents, sunscreen, and insect repellents that can damage plastic components and
finishes.
Secure the weather cap tightly to prevent damage to the USB port.
Secure the weather cap tightly to prevent damage to the external antenna port.
Avoid extreme shock and harsh treatment, because it can degrade the life of the product.

Cleaning the Device

1 Wipe the device using a cloth dampened with a mild detergent solution.
2 Wipe it dry.
After cleaning, allow the device to dry completely.

Cleaning the Touchscreen

1 Use a soft, clean, lint-free cloth.
2 If necessary, lightly dampen the cloth with water.
3 If using a dampened cloth, turn off the device and disconnect the device from power.
4 Gently wipe the screen with the cloth.

Data Management

NOTE: The device is not compatible with Windows
56
NOTICE
NOTICE
95, 98, Me, Windows NT
®
, and Mac OS 10.3 and earlier.
® ®
Device Information