Advertisement
What Else Do I Need?
• A mechanical lift rated for 250 lb (113.4 kg). You can mount an MX10004 router manually or by using a mechanical
lift. Because of the router's size and weight, we strongly recommend that you use a mechanical lift to mount the
MX10004. In this guide, we show you how to mount the router using a mechanical lift.
• 4 AWG (21.1 mm²) stranded wire grounding cable rated 75° C or per local electrical code
• A Phillips (+) screwdriver, number 2 or number 3, depending on the size of your rack-mount screws
• Twenty eight rack mount screws appropriate for your rack to secure the mounting blades, mounting tray, chassis,
and safety restraint to the rack
• A number 3 Pozidriv or Phillips (+) screwdriver for the grounding screws
CAUTION: Ensure that a licensed electrician attaches the appropriate grounding lug to your grounding
cable. Using a grounding cable with an incorrectly attached lug can damage the router.
Assemble the Rack Mount Kit
Here's how to assemble the MX10004 rack-mount kit in a four-post rack:
1. Review the
General Safety Guidelines and
2. Wrap and fasten one end of the ESD grounding strap around your bare wrist, and connect the other end to a site
ESD point.
3. Attach the mounting blades to the front rack posts by using six rack mount screws.
4. From the rear of the rack, slide the mounting tray into the rear posts of the rack such that the mounting blades slide
into the grooves on the mounting tray.
Warnings.
3
Advertisement
