Cisco Catalyst 9124AX Series Hardware Installation Manual page 54

Strand Mounting the AP
2 SMK Lower Bracket
3 5/16-18 x 0.75" Bolt
Figure 42: Assembling the AP to the SMK and Solar Shield
1 SMK Bracket Assembly
2 Solar Shield
3 M8 x 16 mm Button head hex bolt
To mount the AP horizontally onto a cable strand, follow these steps:
Before you begin
Ensure that you have the following materials before strand mounting the AP:
Table 10: Materials Needed for Mounting the AP using AIR-MNT-STRAND1= Kit
Materials Required
Strand Mount Kit (including hardware)
Solar Shield Cover
(2) M8 x 16 mm Button head hex bolts
(2) M8 split lock washer
(2) M8 flat lock washer
Cisco Catalyst 9124AX Series Outdoor Access Point Hardware Installation Guide
46
5 5/16-18 x 1.25 inchBolt
6 Cable Clamp
4 M8 split lock washer
5 M8 flat washer
6 8-32 x 0.62 inch Phillips Pan Head Screw
Supplied in the
Kit?
Yes
Yes
Yes
Yes
Yes
Installation Overview