Cisco Catalyst 9124AX Series Hardware Installation Manual page 34

Vertically Mounting the AP to a Wall
Caution
The mounting wall, attaching screws, and wall anchors must support a 50-lb (22.7–kg) static weight.
Figure 25: Mounting Bracket for Wall and Pole Mounting
1 One of four keyhole slots to mount the AP.
2 One of four slots for steel band clamps, used for pole mounting only.
3 Bracket mount holes for fastening bracket to the wall. You can use bolts of up to 1/4" or 6 mm in
diameter.
Figure 26: Mounting Bracket Dimensions
Before you begin
Ensure that you have the following materials before beginning to mount the AP to a wall:
Cisco Catalyst 9124AX Series Outdoor Access Point Hardware Installation Guide
26
Installation Overview