Cisco Catalyst 9124AX Series Hardware Installation Manual page 44

Articulating Mount for the AP to a Wall
Table 6: Materials for Mounting AP to a Wall with AIR-MNT-ART1= Kit
Materials Needed
Ground lug and screws (provided with the access point)
Pivoting mount kit and hardware
(8) M6 x 12-mm Hex-head Bolts
Adapter bracket for option horizontal mount
Two stainless steel band clamps (adjustable 2 to 5 inch (51 to 127 mm)
Crimping tool for ground lug, Panduit CT-720 with CD-720-1 die
Four wall mounting screws (6 mm max)
#6 AWG ground wire
Shielded outdoor-rated Ethernet (CAT5e or better) cable
Grounding block
Grounding rod
13-mm box-end wrench or socket set
10-mm box-end wrench
Caution The mounting surface, attaching screws, and optional wall anchors to support a 50 lb (22.7 kg) static weight.
Procedure
Step 1 Disassemble the pivot kit, if not already disassembled.
Step 2
Use the mounting bracket's wall-plate end as a template to mark four screw hole locations on the mounting
surface. See
locations (screw holes of maximum 6 mm). See
page 35 for the dimensions of the pivoting mounting bracket.
Step 3 Use four screws and, if required, wall anchors to attach the mounting bracket's wall-plate end to the mounting
surface. These screws and anchors are to be sourced independently.
Note
Note
Step 4 Align the AP-plate end of the bracket with the screw holes in the AP's back.
Step 5
Fasten the bracket plate to the AP by using four M6 x12 mm bolts and a 10–mm box or socket wrench. Tighten
the bolts to 40 lbf-in (4.5 Nm) of torque.
Cisco Catalyst 9124AX Series Outdoor Access Point Hardware Installation Guide
36
Figure 30: Pivoting Wall Mounting Bracket , on page 34
You can use an exterior-grade plywood backboard to mount the AP to stucco, cement, or drywall.
The mounting wall, attaching screws, and wall anchors must support a 50-lb (22.7 kg) static weight.
Supplied in the
Kit?
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
No
No
for the mounting bracket screw hole
Figure 31: Pivoting Wall Mounting Bracket Dimensions, on
Installation Overview