Figure 2 - Form 7 Shipment - York YD Manual

All essential wiring will be secured to the wiring race-
way, and the entire wiring assembly will be attached to
the evaporator. The water sensor wiring for the evapo-
rator nozzles will remain in place.
All openings on the compressors and shells are closed
and charged with dry nitrogen (2 or 3 PSIG).
Miscellaneous packaging of Control Center, oil educ-
tor filter, tubing, water temperature controls, wiring,
oil, isolators, etc. Refrigerant charge shipped in appro-
priate cylinders.
When more than one chiller is involved,
the major parts of each unit will be
marked to prevent the mixing of assem-
blies (Piping and Wiring Drawings to be
furnished by YORK).
INSPECTION – DAMAGE – SHORTAGE
The unit shipment should be checked on arrival to see
that all major pieces, boxes and crates are received.
Each unit should be checked on the trailer or rail car
when received, before unloading, for any visible signs
of damage. Any damage or signs of possible damage

FIGURE 2 - FORM 7 SHIPMENT

8
5/8" X 2-1/2" BOLTS,
LOCKWASHERS, &
HEX NUTS
must be reported to the transportation company imme-
diately for their inspection.
YORK will not be responsible for any
damage in shipment of at job site or loss of
parts. (Refer to Shipping Damage Claims,
Form 50.15-NM).
When received at the job site, all containers should be
opened and contents checked against the packing list.
Any material shortage should be reported to YORK
immediately (refer to Shipping Damage Claims (Form
50.15-NM)).
DATA PLATES
A unit data plate is mounted on the Control Center as-
sembly of each unit, giving unit model number; design
working pressure; water passes; refrigerant charge; se-
rial numbers; and motor power characteristics and con-
nection diagrams.
A Control Panel data plate, which includes control
panel part number and serial number is also included.
CONDENSER
COOLER
FORM 160.69-NM4
ISSUE DATE: 9/30/2020
LD03865
JOHNSON CONTROLS