1. The wire gauge for the terminal block should be in the range
between 12 and 24 AWG.
2. Alarm relay circuit accepts up to 24V with a maximum current
of 1A.
2.6 Grounding the Device
Users MUST complete grounding wired with the device; otherwise, a sudden
lightning could cause fatal damage to the device.
EMD (Lightning) DAMAGE IS NOT COVERED UNDER WARRANTY.
10
Max. Fault Alarm Loading: 24V, 1A
1 2 3 4 5 6
DC Input:
48-54V
Earth Ground
, 7A max.