1. The wire gauge for the terminal block should be in the range
between 12 and 24 AWG.
2. Alarm relay circuit accepts up to 24V, max. 1A currents.
3.6 Grounding the Device
Uses MUST complete grounding wired with the device; otherwise, a sudden
lightning could cause fatal damage to the device.
EMD (Lightning) DAMAGE IS NOT COVERED UNDER WARRANTY.
Max. Fault Alarm Loading: 24V, 1A
1 2 3 4 5 6
DC Input:
V1+
V2+
12-54V
, 7A max.
PWR1
Alarm
PWR2
Earth Ground
11