Hitachi CP-AW100N User Manual page 85

Phenomena that may be easy to be mistaken for machine defects (continued)
Phenomenon
Scheduled
Display Image
command does
not work.
Scheduled
Display Text
command does
not work.
NOTE
• Although bright spots or dark spots may appear on the screen, this
is a unique characteristic of liquid crystal displays, and it does not constitute or
imply a machine defect.
Cases not involving a machine defect
The lamp is turned off.
If the projector is in the standby state, please press the
STANDBY/ON button on the projector or the remote
control to turn on the lamp. If the POWER, TEMP, LAMP
indicators on the control panel of the projector represent
some errors (such as temperature error, lamp error), take
countermeasures referring to the table on page 78, 79 and
80 and then turn on the lamp.
Security features are activated and the projector is
locked.
Please release the security lock.
Image data for display is not stored in the projector.
No image data for display is registered in the specified data
store number.
Store image data for display in the projector.
( please refer to "3.5 MY IMAGE (Still Image Transfer)
Display" in the Network guide.)
The lamp is turned off.
If the projector is in the standby state, please press the
STANDBY/ON button on the projector or the remote
control to turn on the lamp. If the POWER, TEMP, LAMP
indicators on the control panel of the projector represent
some errors (such as temperature error, lamp error), take
countermeasures referring to the table on page 78, 79 and
80 and then turn on the lamp.
No text data for display is registered.
No text data for display is registered in the specified data
store number.
Store the text data for display.
( please refer to "3.6 Messenger Function" in the Network
guide.)
High-priority text data is being displayed.
(please refer to "3.6 Messenger Function" in the Network
guide and the application manual for the Messenger function.)
The projector is forced to turn the lamp on and displayed the
high-priority text data. Text display by the scheduling function
will not start until the projector completes the display of high-
priority text data.
Troubleshooting
Reference
page
18, 78,
79, 80
63
-
18, 78,
79, 80
-
-
85