Hitachi CP-AW100N User Manual page 70

Maintenance
8.
Follow the procedure below to close the lens door
properly.
(1) Insert the power cord with the lens door opened.
(2) The power indicator will light in orange, and the
lens door closes automatically. Do not touch the
lens door when the door is closing. Do not allow
anything to obstruct the lens door.
9.
Turn the projector on and reset the lamp time
using the LAMP TIME item in the OPTION menu.
(1) Press the MENU button to display a menu.
(2) Point at the ADVANCED MENU in the menu using the
▲/▼ cursor buttons, then press the ► cursor (or the
ENTER) button.
(3) Point at the OPTION in the left column of the menu
using the ▲/▼cursor buttons, then press the ► cursor
(or the ENTER) button.
(4) Point at the LAMP TIME using the ▲/▼ cursor buttons,
then press the ► cursor (or the ENTER / the RESET)
button. A dialog will appear.
(5) Press the ► cursor button to select the "OK" on the dialog. It performs
resetting the lamp time.
WARNING ►Be careful not to pinch your finger with the lens door, to prevent
an injury.
CAUTION ►Do not touch any inner space of the projector, while the lamp
is taken out.
NOTE • Please reset the lamp time only when you have replaced the lamp,
for a suitable indication about the lamp.
• When the lens door is closed manually, it may not shut properly.
• The lens door may not close when the LENS DOOR LOCK function of the
SERVICE item in the OPTION menu is set to ON. Refer to the LENS DOOR
LOCK function of the SERVICE item in the OPTION menu (
70
).
53