Hitachi CP-AW100N User Manual page 60

NETWORK menu
Item
PROJECTOR
NAME
(continued on next page)
60
(1) Use the ▲/▼ buttons on the
NETWORK menu to select the
PROJECTOR NAME and press
the ► button. The PROJECTOR
NAME dialog will be displayed.
(2) The current PROJECTOR NAME
will be displayed on the first 3
lines. If not yet written, the lines
will be blank.
Use the ▲/▼/◄/► buttons and the ENTER or INPUT button to
select and enter characters.
To erase 1 character at one time,
press the RESET button or press
the ◄ and INPUT button at the
same time. Also if you move the
cursor to DELETE or ALL CLEAR
on screen and push the ENTER
or INPUT button, 1 character or
all characters will be erased.The
PROJECTOR NAME can be input
up to 64 characters.
(3) To change an already inserted
character, press the ▲/▼ button to
move the cursor to one of the first
3 lines, and use the ◄/► buttons to move the cursor on the
character to be changed. After pressing the ENTER or INPUT
button, the character is selected. Then, follow the same
procedure as described at the item (2) above.
(4) To finish entering text, move the cursor to the OK on screen and
press the ►, ENTER or INPUT button. To revert to the previous
PROJECTOR NAME without saving changes, move the cursor
to the CANCEL on screen and press the ◄, ENTER or INPUT
button.
Description