Changing The Frequency Of Remote Control Signal - Hitachi CP-AW100N User Manual

Remote control

Changing the frequency of remote control signal

The accessory remote control has the two choices on signal
frequency, Mode 1:NORMAL and Mode 2:HIGH. If the remote
control does not function properly, attempt to change the
signal frequency.
In order to set the Mode, please keep pressing the
combination of the two buttons listed below simultaneously for
about 3 seconds.
(1) Set to Mode 1:NORMAL... the VOLUME - and the RESET buttons
(2) Set to Mode 2:HIGH... the MAGNIFY OFF and the ESC buttons
Please remember that the REMOTE FREQ. in the SERVICE
item of the OPTION menu (53) of the projector to be
controlled should be set to the same mode as the remote
control.
16
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
ASPECT AUTO SEARCH
BLANK
PAGE VOLUME
MAGNIFY FREEZE
UP
ON
DOWN
OFF
(2) (1)
KEYSTONE MY BUTTON MUTE
1 2
MENU
POSITION
ENTER
ESC RESET