Hitachi CP-AW100N User Manual page 61

Item
MY IMAGE
AMX D.D.
(AMX Device
Discovery)
(continued on next page)
Selecting this item displays the MY
IMAGE menu.
The application software "PJImage"
is required to store image(s) into the
projector.
Use the ▲/▼ buttons to select an item which is a still image by the
MY IMAGE ( MY IMAGE (Still Image Transfer) Display of the
User's Manual - Network Guide) and the ► or ENTER button to
display the image.
• The item without image stored cannot be selected.
• The image names are each displayed in 16 characters or less.
To switch the image displayed
Use the ▲/▼ buttons.
To return to the menu
Press the ◄ button on the remote control.
To erase the image displayed and its source file in the projector.
(1) Press the RESET button on the
remote control while displaying an
image to display the MY IMAGE
DELETE menu.
(2) Press the ► button to perform to erase.
To stop erasing, press the ◄ button.
Use the ▲/▼ buttons to turn the AMX Device Discovery on/off.
ON ó OFF
When ON is selected, the projector can be detected by controllers
of AMX connected to the same network. For the details of AMX
Device Discovery, visit the AMX web site.
URL: http://www.amx.com/
Description
NETWORK menu
61